The QPSK constellation diagram makes detailed diagnosis of digital satellite signals simple.

The satellite finder comes complete with mains charger cable.

The HD-TC8 is the latest generation meter for the Global uptake of VSAT installations, measuring BPSK / QPSK / 8PSK, DigiCipher II and Turbo Code formats. Specifically designed for the new Tooway internet service on Hotbird 13E Ka band”.
 

• New graphics capable 128 x 64 pixel high brightness backlit LCD

• Easy to use Spectrum Display mode

• QPSK Constellation display

• Histogram display with up to nine simultaneous carrier measurements for single cable installations (SCR)

• Data Logging (upload installation measurement data to your PC)

• New Full Speed USB 2 interface with automatic driver download

• Full backwards compatibility with existing HDSM downloads

• New nylon F connector inserts for maximum durability

• Faster processor with recall of last selection used

• New manual carrier configuration mode

• Frequency range 950 to 2150 MHz

• LNB Pass / Fail test function

• LNB short circuit protection

• Satellite cable integrity test

• LNB voltage selectable up to 22 V,750 mA maximum

• Field-replaceable F barrels for RF IN and DC OUT

• Bit rates from 1 MBaud to 30 MBaud

• Frequency range 950 to 2150 MHz

• Input levels from -70 dBm to -25 dBm

• Bargraph RF level display with values in dBm or dBuV

• Bargraph display of signal quality for peaking and polarization

• Display of RF levels over swept frequency range (spectrum)

• Display of I and Q values by constellation diagram

• Writes and recognises DiSEqC 2.0 commands

• Easy download of transponder information by area/operator

• Multiple-entry performance log for off-line upload

• Quick-check LNB/cable diagnostic by current and RF level